Welch-allyn SureTemp PlusModule - User Manual Manual do Utilizador descarregar pdf (Página 53)

SureTemp Plus Module OEM Implementation Communications Protocol

Welch Allyn OEM Technologies Conﬁdential 53

(9435) Set Default Thermometer Mode

Causes the module to read the default thermometer mode from the host. The default mode

speciﬁes whether the device enters normal predictive mode or monitor mode when the probe

is pulled.

Command Code (hex)

9435

Data

Size (bytes) Type Description

1 int8 0: Normal (Predictive)

1: Monitor

Response Data

Size (bytes) Type Description

0 N/A None

Notes

Use the “Save Calibration Data to EEPROM” command (page 41) to save permanently to

EEPROM.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 84 85

Sem comentários

Welch-allyn SureTemp PlusModule - User Manual Manual do Utilizador Página 53